How To Drive An Automatic Car?

Manual cars are getting old fashioned; however, they are still widely used by many drivers. For easy driving, automatic transmission cars are being produced in the market on a high scale. Initially, these were expensive and consumed more fuel, for this reason, these cars were not demanded as manual cars. However, automatic cars have now become more economical.

The automatic car is easy to handle and control as compared to the manual car.  Most of the young people are going towards automatic car because it is user-friendly. At TryArticles, we will tell you methods to drive automatic car and tips which will help you to drive your car safely and cautiously.

Before You Start Driving

Before you start driving, it is important to know about the possibilities offered by the car we drive. Every car has different instructions on how to drive it and take care of it correctly. So, you just need to read it carefully to know its handling specification that will make your road life longer.

  • Controls And Equipment Of The Car

Controls & Equipment Of A Car

It is good to get familiar with the controls and the equipment of the car. It will help you to feel easy and confident when you get behind the wheel. Basic controls of the cars are described below.

  • Pedals Of Automatic Car

Pedals Of Automatic Car

An automatic car has only two pedals, the right  pedal is the gas pedal and the other is the brake pedal. The left one is wider than the right one. To drive an AT car, you need to press the brake pedal to start the car.
In the automatic car, there is no clutch that’s why the left foot is always at rest. If you are used of driving manual transmission car, it will take some time to be habitual to put your left foot on the footrest.

  • Gear Shifter

Gear Shifter

It is located between the seats. It is crucial to know the roles and functions of the gears to ace the driving test. You will see some numbers and letters on an automatic gearbox which are known as PRNDL (pronounced as ‘Prindle’) in the automotive world. Let’s elaborate these terms.

  • P (Parking): to park the car safely

It locks the transmission by leaving the car parked safely. You can not move your car anywhere in this position.

  • R (Reverse): for reverse driving

This allows you to drive your car backwards. You just need to press shift-lock button before choosing the R gear.

  • N (Neutral): no gear

The main objective of neutral in an automatic car is to tow or push the car. When we are at a traffic light or stopped for a short time, we should change the gear to “N” (Neutral).

  • D (Drive): this will allow car to start and move

It will select gears automatically and allow the car to start and move forward.

  • L (Low): to set a gear at low

Some gearboxes will allow you to select 3, 2 or 1 gear. It will be helpful while slowing down the speed of your car such as driving on high or down slopes. Your car gets more staying and towing power in this condition.

How to Drive an Automatic Transmission?

Now when you are totally familiar with all the controls and instructions, you are ready to drive an AT car. If it’s your first time behind the wheel, look for low traffic place. Now it’s time to know the steps to drive an AT. It’s as simple as mentioned below.

  • Adjustments

Adjust the seat, so you can reach the pedals easily and comfortably. Look all the controls and see where these are positioned for your own convenience.

  • Starting The Car

In order to start the car the position of the lever must be in park (P), now place your right foot on the brake and press it firmly till it reaches the ground. Insert the key in the ignition, turn the key and start your car.

  • Drive The Car

Move your car’s gear shifter to D which means drive, with your right foot still on the brake. Now gently release the brake pedal, you will see your car start moving forward. Press down the gas pedal to speed up your car. When you increase the speed, your car will automatically shift through the gears.

  • To Slow Down Or To Stop

Slow down the car using your right foot on the brake. Do practice on how to press the brake slowly to avoid slamming on the brakes. In order to stop your car, simply keep the gear in D and gently press the brake pedal, it will stop when the brake pedal will be totally down.

  • Reverse The Car

With your right foot still on the brake pedal, shift gear into R that means the reverse. Now lift your foot from the brake pedal and press gas pedal gently, it will start moving backwards.

  • Park The Car

In order to park the car, stop your car using brake pedal, shift gear into P (Park). Now turn off the car and congrats you did it!
Driving an automatic transmission is very easy once you get familiar with the controls and get used to it. You just need to do a lot of practice, as practice makes man perfect.

I hope you liked my article about, “How To Drive An Automatic Car?” If you have any query, please list it down in the comments section. For more articles of your interest visit Motor category at TryArticles.

You might also like

Leave A Reply

Your email address will not be published.